1. Given is the cross-section of a stream with uniform flow having a slope of 0.007 and the roughness coefficient of the stream bed is 0.025. Determine: a. Hydraulic radius b. Average velocity of the stream using Manning's coefficient and the corresponding discharge c. Average velocity of the stream using Kutter's coefficient and the corresponding discharge. 5.5 m 6.0 m 6.0 m 6.0 m 5.5 m 2.7 2.4

1. Given is the cross-section of a stream with uniform flow having a slope of 0.007 and the roughness coefficient of the stream bed is 0.025. Determine: a. Hydraulic radius b. Average velocity of the stream using Manning's coefficient and the corresponding discharge c. Average velocity of the stream using Kutter's coefficient and the corresponding discharge. 5.5 m 6.0 m 6.0 m 6.0 m 5.5 m 2.7 2.4

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Flow from a concrete channel (n = 0.017) falls freely into a reservoir at a rate of 7.8 m3/s. The width and longitudinal slope of the channel are 5 m and 0.0006, respectively. At the inlet of the reservoir, the flow becomes critical. Analyse the type of profile and plot the water surface profile using numerical integration and the direct step method with 4 steps.
For a 2-D flow field, the stream function y 3 y==(y²-x²). is given as 2 The magnitude of discharge occurring between the stream line passing through points (0, 3) and (3, 4) is
Q2/Béd width of an open channel is B = 40 (m), depth of water in the channel is y = 2 (m), longitudinal bed level slope is So = 0.001 and Manning's coefficient is n= 0.025 { m(l)/s}. Calculate the value of water flow rate in the channel. Find the Type of flow in the channel.
Assignment1. Derive from first principle the chezy equation for uniform flow.2. A channel 5m wide at the top and 2m deep has sides sloping 2 vertically in 1 horizontally. The slope of the channel is 1 in 1000. Find the volume rate of flow when the depth of water is constant at 1m. Take c = 53 in si units. What will be the depth of water if the flow were to be doubled? [ q = 4.79m3/s, h = 1.6m]3. A trapezoidal channel is to be designed to carry 280m3/minute of water. Determine the cross – sectional dimensions of the channel if the slope is 1 in 1600, side slopes 45oand the cross – section is to be a minimum, take c = 50 in si units. [h = 1.53m, b = 1.27m]4. A 2.0m diameter concrete pipe on a slope of 0.005 is to carry water at a normal depth of 1.5m. Determine the flow velocity and flow rate. Take n=0.014. Also determine q when ho=0.75 and h=1.0m5. Prove that the best hydraulic section for a rectangular channel 6. Determine the best section for a semi-circular cross section.7. Find the…
Determine the slope of the bed of a rectangular channel of width 6 m and depth of flow 3 m. Assume the rate of flow as (20+X) ms and Chezy's constant 'C' as (50+X).
Assignment 1. Derive from first principle the chezy equation for uniform flow. 2. A channel 5m wide at the top and 2m deep has sides sloping 2 vertically in 1 horizontally. The slope of the channel is 1 in 1000. Find the volume rate of flow when the depth of water is constant at 1m. Take c = 53 in si units. What will be the depth of water if the flow were to be doubled? [q = 4.79m/s, h = 1.6m] 3. A trapezoidal channel is to be designed to carry 280m3/minute of water. Determine the cross – sectional dimensions of the channel if the slope is 1 in 1600, side slopes 45° and the cross – section is to be a minimum, take c = 50 in si units. [h = 1.53m, b = 1.27m] 4. A 2.0m diameter concrete pipe on a slope of 0.005 is to carry water at a normal depth of 1.5m. Determine the flow velocity and flow rate. Take n=0.014. Also determine q when ho=0.75 and h=1.0m 5. Prove that the best hydraulic section for a rectangular channel 6. Determine the best section for a semi-circular cross section. 7. Find…
The water velocity in the channel shown in the figure has a velocity distribution across the vertical section equal to u = umax (y/d)!/2. What is the discharge in the channel if the water is 2 m deep (d = 2 m), the channel is 5 m wide, and the maximum velocity is 3 m/sWhat is the mean velocit max (y\1/2 u = u. maxd d
The cross-section of a navigation channel is shown in figure. A I J B/ 4m D E F 30 m 30m'6m 6m 8'm *20m 150 m 20m Channel section Determine the discharge through the channel if the depth of flow is 12 m. The channel has a slope of 1 in 2000 and the Chezy's constant C is 45.
For Manning's Equation, the letter A/P represents the hydraulic radius. * O False O True The Kirpich equation is used to forecast flood * False True The shape of the hydrograph is affected by different parameters. False O True
Given the following data of a stream of uniform flow: h b h=height of water = 1.20m b= with of bottom = 3.30m water surface tength of stream =120.70m elevation = 220.34m elevation = 221.31m A = cross sectional area, sq m P = wetted perimeter, m S =slope of stream bed, decimal n = 0.025 (roughness coefficient ) Determine the following: a) Hydraulic radius b) Average velocity of stream using Manning's coefficient and the corresponding discharge c) Average velocity of stream using Kutter's coefficient , and the corresponding discharge
Hardy-Cross method is used for the solution of the pipe network flow distribution using the eq as shown below. where, CW - clock-wise (taken +ve), CCW- counter clock-wise (laken -ve). As a 1st guess, you have assumed the following flow distribution fulfiling the continuity condition. 14er In the given loop, if AQ = - 0.1 m'is obtained, what will be the next flow distribution? 14 O None of the distribution are correct
A rectangular channel is 6.3 m wide and has depth of flow of 1.7m. The slope of the channel bed is 1/1000. The material used to line the channel is known to have a Ch = 49m^(1/2) m/s. Calculate the mean velocity & discharge.